Principle of operation of the breakage sensor is based on the integrity control of closed perimeter line
generated by a double micro wire.
|Betriebsspannung||ALKALINE battery, dimension 23A (N), 12 V|
|Temperaturbereich||minus 40...+65 °С|
|Micro wire reserve||not less than 1000 m|
|Current consumption in stand-by mode||0,045 mА|
|Time of continuous operation||1...1,5 months|
Principle of operation of the breakage sensor is based on the integrity control of closed perimeter line generated by a double micro wire.
A very thin and imperceptible wire is stretched from the sensor’ case and fastened along to the perimeter site or the object surface, transport, doors or windows. If an intruder enters the perimeter or steals an object, he breaks the wire. Close the micro wire end by sealing it with a match or lighter flame to generate a closed perimeter line.
After the switching ON the sensor goes to the stand-by mode to control the micro wire integrity. The sensor triggers at the breakage of a double micro wire. Triggering is accompanied with an intermittent sound alarm.
That’s why it is barely visible for an intruder and doesn’t provoke any efforts for a human during its breakage.
In case of battery discharge less than allowed the sensor MOSKIT generates a continuous sound signal requiring replacing the battery.
The sensor MOSKIT is supplied from a built-in battery.
Rapidness at the generation and the reconstruction of the protected site.
Rapidness at the cartridge replacement with the micro wire MOSKIT-CARTRIDGE and the battery.
MOSKIT-KIT is intended for the sensor transportation on a waist belt in the compact bag and has two spare cartridges.
- compact bag with the fixations on a waist belt - 1 pc.
- sensor MOSKIT - 1 pc.
- spare cartridges in the protective pocket - 2 pc.